...Home Page
...Company Profile
...Monitoring Service

...
Applications
...
- Monitoring & Control
...
- Security & Surveillance
...
- Vehicle Tracking
...
- Site Automation
...
- SCADA Systems
...Products
...Downloads
...White Papers

...
Contact Us

Site Map: Sentor > Home > Products

SENTOR PRODUCTS  
Description Sentor ST3000 Controller Unit  
Technical Details
  • Up to 80 Programmable Inputs
  • Up to 40 Outputs
  • Lead Acid Backup battery
  • On-board lithium battery
  • Tamper switches
  • Auxiliary Power outputs
  • Horn and siren outputs
  • RS232 Communications port
  • RS485 Port
  • X10 connection
  • 19" Rack or wall mount casing
  • Analog 0 - 30V
  • Analog 0 - 10V
  • Analog 0 - 1V
  • Analog 4 - 20mA
  • Analog Temperature
  • Digital
  • Protected Loop


Above: The Sentor ST3000R Sentor Controller Unit - Rack Mounting

Right: The Sentor ST3000R Sentor Controller Unit - Wall Mounting

 

Description Sentor ST317 I/O Expansion Module  
Technical Details
Each ST317 fits inside the ST300R or ST300W housing.

The card has a mirror image of the inputs available on the ST300 Motherboard. Comes with 16 optically isolated programmable analogue or digital inputs and 8 Relay Dry Contact Digital outputs. Includes expansion cable.


Above: The Sentor ST317 I/O Expansion Module

 
 

Description Sentor ST330 Telephone Module  
Technical Details

The ST330 interface is an Approved interface card that plugs directly onto the Sentor motherboard. It performs many tasks such as being a landline modem for remote data transfer.

The ST330 can also be programmed as a dialer to call a computer, and/or a telephone and even a pager. It talks in a real recorded voice with dynamic menu and device details following the suggested keypad prompts over a Mobile or Standard telephone.

The technician or manager can be informed of alarms in real time over the phone with values and alarm/device information. The user can remotely change the state of a device from the phone or at the Central Computer. A remote laptop (with the correct codes) can access the Sentor System through this card allowing a live graphical picture of the remote sites with the event log and real time readings.


Above: The Sentor ST330 Telephone Module

 
 

Description Sentor ST304 Modem  
Technical Details

This is Cellular (GSM) Data modem used for remotely dialing sites.

The Cellular (GSM) is a Tri-Band modem that works with both the GSM system and the American Cellular Networks.


Above: The Sentor ST304 GSM Modem

 
 

Description Sentor ST303 Radio Modem  
Technical Details

The RF (Radio) modem is used for remotely dialing sites that do not have cellular, land line or GSM coverage.

Like the GSM Cellular modem the RF modem uses data transmissions to talk to the Sentor GUI from a remote site.


Above: The Sentor ST303 Radio Modem

 
 

Description Sentor ST007V Heavy Duty Keypad  
Technical Details

Sentor LCD heavy duty serial Programmable Keypad, Vertical mount has a Large LCD backlit keypad, fully programmable as a Security keypad and Site Access.

Will also display all device readings live such as Voltages, Forward and Reflected Power for Transmitter sites, Battery backup voltages, Site Access Control and System Event Data Log.


Above: The Sentor ST007V Heavy Duty Keypad

 
 

Description Sentor ST007H LCD Serial Keypad  
Technical Details

Sentor LCD serial Keypad, horizontal mount has a Large LCD backlit keypad fully programmable as a Security keypad and Site Access.

Will also display all device readings live such as Voltages, Forward and Reflected Power for Transmitter sites, Battery backup voltages, Site Access Control and System Event Data Log.

The ST007H also has an attractive finish for office applications.


Above: The Sentor ST007H LCD Keypad

 
 

     
  
© 2007-2008 Sentor Monitoring Systems Pty Ltd Australia & Sentor Inc. USA 2000-2008