Where a waterproof solution is needed, such as Agricultural, Pipelines or any remote applications, we provide a high quality lockable waterproof casing to International IP65 or IP67 Standard. Available also in Powder Coated finish or in Stainless Steel.
More
This cabinet has a hinged lid and comes with convenient cable knockouts for cable entry in the rear panel. When the cabinet is wall mounted the knockouts are located on the right hand side and there is also additional knockouts in the base panel so cables can be run directly into the Sentor from the wall cavity so all cables are hidden away from tampering. This is excellent for Security Installations and buildings where cosmetics are important.
More
Telephone Card and heat sink plate. These boards mount into the housing shown.
More
A maximum of 4 cards can be fitted to the motherboard for example: 4 expansion cards or if you use a ST330 Telephone card then you can only fit 3 expansion cards. Also any more than 2 extra cards require an expansion ribbon cable ST 450 Includes expansion cable.
More
The ST330 can also be programmed as a dialer to call a computer, and/or a telephone and even a pager. It talks in a real recorded voice with dynamic menu and device details following the suggested keypad prompts over a Mobile or Standard telephone.
More
This is a full Multi-Band ¾G GPRS On-Air all the time Cellular Data modem used to pass Alarms, Data and Events from the sites to the Cloud Data Base or direct to the Central Computer. Obviously Cellular Coverage is required for these to operate from each Site however each site can have different connections to allow remote connectivity to Sentor.
More
Weigand is the specification used by the Security Industry around the Globe. This is for interfacing many different brands and types of Access Control Devices such as Card Readers, Proximity Readers, Fingerprint Readers, Iris Readers and many other Security and Access Control Readers.
More
The Sentor ST007 will display all device readings live such as Voltages, Forward and Reflected Power for Transmitter sites, Battery Backup Voltages, Site Access Control and System Event Data Log. The Panel can be fully programmed to control all devices and software scenarios at each site making the need for laptops and other computers redundant at the sites. This panel allows for Multiple User Pin Codes for entry into the sites recording the entry/exit times and identification of the person who entered the site.
More
Sentor LCD heavy duty serial Programmable Terminal & Keypad, Vertical mounting has a Large LCD backlit Screen and Keypad, fully programmable as a Security Keypad and Site Display Module.
More
Sentor utilizes the most widely used Security proximity protocol available called “Weigand”. Almost every quality brand of reader in the world uses this protocol to interface to Access Control Systems. There is a range of these readers listed in the price list.
More
The Sentor Remote Surveillance SystemsThe Sentor DVR supports plug-and-play installation and provides everyday protection for business environments. Users can receive clear videos and images captured by their system through mobile devices and PC networks.
More
These devices exhibit almost zero insertion loss, are totally non invasive and are simply screwed in line on the coaxial antenna cable either before the combiner (or Duplexer) or after the combiner or both
More
Implementing the COM Port Redirector software simplifies the integration process by extending the functionality of (serial) COM port-based Windows® applications. It redirects application data destined for a local serial (COM) port on a PC over the Ethernet/Internet network and through the ST1100-B enabled device. Communications to and from the networked equipment is processed by the PC application as if it were from the local COM port.
More
The Sentor Temperature Sensor is light and easy to install on to any surface. The calibration numbers are already set up in default within the Software so all you need to do is select in software if you want C or F degrees and Sentor does the rest. Connection is by 2 wires only into any Analog input. The Sentor inputs actually supply voltage to the sensor via the 2 sensing wires which means you do not need to run separate power wires.
More
he SNMP V3 Hardware platform is the latest in SNMP integration. Working either by itself as pure SNMP over any Ethernet connection or working in conjunction with Sentor ST3000 as a slave either way SNMP V3 is here.
More
he List of Sentor Sensors is always changing and always increasing. If you do not see the sensor you require in our price book please ask and we will find the correct sensor for your application. The Price List is available on request to authorized Dealers and Customers only
More
Companies no longer are tied to the computer room as all of the information, Logs, Alarms and statistics are available over this portal to their PDA devices or Control Room all “Live”
More
Sentor Message Pro – Full messaging and Alarm software – Sends emails, SMS and Pager messages to the correct person for a particular alarm
More
DNP3 Protocol is also available for those folk in the Utilities Industry such as Water. Oil and Gas Infrastructure.
More