Skip to content
Request a Quote

Products

One platform. Built to fit your site, not the other way around.

Start with the ST3000 controller. Add expansion hardware as your site grows. Manage all of it through one software layer.

Flagship product

The ST3000 Controller

The core of every Sentor installation. Sixteen programmable inputs, expandable to eighty; eight relay outputs, expandable to forty. Reads power, temperature, motion and access events, and controls equipment on-site — with or without a live connection.

Variants: ST3000W (wall-mount cabinet), ST3000R (19″ rack-mount), ST3000S (reinforced security housing).

Sentor ST3000 controller with the lid open
ST3000W wall-mount cabinet

ST3000W

Wall Mount

Lockable wall cabinet with hinged lid and convenient cable knockouts.

ST3000R rack-mount controller

ST3000R

19″ Rack Mount

2RU metal powder-coated enclosure for standard equipment racks.

ST3000S

Security Housing

Reinforced enclosure with tamper switch for high-security sites.

Expansion hardware

Accessories & modules

Plug in what your site needs — sensing, access control, communications, enclosures or on-site displays.

ST317

I/O Expansion Card

Adds 16 inputs and 8 relay outputs per card, up to 4 per unit.

ST330

Telephone / Voice Card

Landline modem, voice-announced alarm calls, remote dial-in access.

ST30G

Cellular Modem

Always-on 3G/4G connectivity with static IP, SSL-secured.

ST301

Serial-to-Ethernet Module

Network-enables any Sentor controller over LAN or internet.

ST505

Bi-Directional Power Coupler

Real-time forward/reflected power (VSWR) monitoring for radio transmitters. Non-invasive install, pre-calibrated to frequency, male or female N connectors.

ST007V/H

LCD Keypad Terminal

On-site display and keyless entry, up to 31 per system.

ST352A

Wiegand Access Interface

Connects card, biometric and proximity readers for full access control, supporting up to 64,000 users.

ST025

Temperature Sensor

Two-wire, self-powered, ±0.4°C accuracy.

ST5000

NVR & Camera Kits

Video surveillance managed through SenVision.

ST9-302

SNMP v3 Board

Attaches up to 48 SNMP devices. Supports SNMP v1, v2 and v3. Runs standalone or as a slave to the controller.

ST1100

Serial-to-Network Web Server

RS-232, RS-422 and RS-485 to 10Base-T/100Base-TX ethernet. 2 MB flash ROM, configurable by internal web server, Telnet or serial.

ST025E

Extended-Range Temperature Sensor

−45 °C to +150 °C, on the same two-wire electrical specification as the ST025.

IP65 / IP67 Housings

Ingress-rated waterproof enclosures in powder-coated or stainless steel finish, for outdoor, marine and washdown sites.

Surveillance & DVR Systems

Eight-channel CCTV kits with 32-channel systems available. Real-time H.264 compression, USB backup, web and mobile viewing, email notification.

Access Reader Range

Proximity, card swipe, keychain medallion, fingerprint, palmprint, iris and facial recognition readers, connected through the ST352A.

Software suite

Which one do you actually need?

Every Sentor system runs on SitePRO. Add the others as your network grows.

SoftwareWhat it’s forWho needs it
SitePROGraphical interface to configure and monitor a controller directly — the required base software for every install.Every customer
SenTrendAutomated polling and network management across 5+ sites; downloads logs on a schedule, exports for analysis.Multi-site operators
SentorCloudWeb and mobile dashboard with mapped site locations — view any site’s status from a phone, anywhere.Distributed teams
SenBaseDatabase server that collects and graphs readings across a LAN, and can also be configured to run live on the internet from your own server instead of the Sentor cloud service.On-premise data retention
Message ProSMS, pager and email alerting engine — routes the right alarm to the right person automatically.Automated alerting
SenCheckPushes access-card additions and removals to every site on the network in one action.Multi-site access control
Sentor GeniusCalibration utility for RF couplers and analogue sensors.Install & commissioning

Protocols & compliance

Built to fit the systems you already run.

SNMP v1 / v2 / v3

DNP3

SCADA-compatible

Cellular

Ethernet / TCP / IP

Fibre optic

Satellite

Radio & microwave

DSL

Dial-up

Not sure what configuration you need?